SMC FRP mold temperature control machine acts on the hydraulic press mold to control the mold temperature to reach the temperature required by the production process. The mold temperature control machine uses electric power as the energy and heat transfer oil as the heat carrier. The high-temperature pump is used to force the liquid-phase circulation of the heat transfer oil to transfer the heat energy to the cavity of the SMC molding mold, and then return to the heating device for reheating, so that the mold temperature gradually rises to the temperature required by the process and remains constant. The mold temperature required by the SMC FRP mold process is between 135 ° C and 170 ° C.
FRP molding generally adopts the method of molding, that is, a certain amount of molding material is added to the preheated mold, and the plastic products are formed by heating and pressure curing. The basic process is: put a certain amount of pre-treated molding material into the preheated mold, and apply a high pressure to make the molding material fill the mold cavity. The molding material is gradually solidified under a certain pressure and temperature, and then the product is taken out of the mold, and the necessary auxiliary processing is carried out to obtain the product.
The FRP mold temperature control machine acts on the FRP molding process, which helps to accelerate the curing speed of the product, thereby shortening the molding cycle, improving the production efficiency, increasing the fluidity in the molding process, strengthening the uniformity of curing, reducing the internal stress of the product, improving the product quality and enhancing the market competitiveness of the product. It is the right-hand assistant in the FRP molding process.
